Fitted with a driver array similar to the MENTOR 1, the LCR ribbon tweeter can be turned 90 degrees, allowing you to mount the speaker vertically or horizontally.
Available in black or white lacquer finish, the MENTOR LCR will enhance the beauty of any flat screen television.
MENTOR LCR is factory-fitted with an integral wall bracket. All that is required for secure wall-mounting is two screws in the wall, demonstrating once again that with DALI you can have convenience and ease of use without sacrificing performance.
Please find the MENTOR LCR brochure here the MENTOR manual here.
Specifications:
| Product Series | MENTOR |
| Speaker Type | Front Rear Surround |
| Frequency Range (+/-3 dB) [Hz] | 45 - 34,000 |
| Sensitivity (2,83 V/1 m) [dB] | 86.0 |
| Nominal Impedance [Ω] | 6 |
| Maximum SPL [dB] | 106 |
| Recommended Amplifier Power [W] | 20 - 120 |
| Crossover Frequency [Hz] | 3,000 / 12,000 |
| High Frequency Drivers | 1 x 17 x 45 mm Ribbon 1 x 28 mm Soft Textile Dome |
| Low Frequency Driver | 1 x 5" Wood Fibre Cone |
| Enclosure Type | Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] | 47.0 |
| Connection input(s) | Single Wire |
| Magnetic Shielding | No |
| Recommended Placement | Above/Below TV Screen On-Wall |
| Dimensions With Base (HxWxD) [mm] | 660 x 165 x 150 |
| Weight [kg] | 6.2 |
| Accessories Included | Manual Rubber Bumpers |
| Finish | Black Satin Black Satin White Satin |
